Thursday, July 7

How to Update Samsung Galaxy Fit to Gingerbread 2.3.4 [Updated]

Update : Here is the New Gingerbread version please download this  one ! Here it is Download S5670XWKQ2 
Use this password for S5670XWKQ2 ---> samfirmware.com
Improvements in the latest Gingerbread XEKPG 2.3.4:
  • There are whole lot of improvements which have been updated in this version, though it will not be possible to list here all of them but

  • The think free office version is now updated to the 2.0 version

  • Camera fix has been done and also the GPS issue is now resolved which most of the users reported,

  • Sleep issue for the sensor disconnection too has been resolved in this update.

  • Previously when there were two contacts with the same last two digits like (11 and 111) were equal then the contact was not successfully added, but now after this update the problem has resolved,

  • Samsung apps are now updated with the latest version of UNA 2.0.7

  • Previously whenever one used to open the high resolution images, it used to prompt for the force closing of the application, but now after applying this update you no longer will have to face the force close issues as this solves the issue completely. This problem was mainly with the high quality GIF images.

  • One can now add the space in the view message detail

  • Along with all this, you will get to see a whole new user interface which is being updated with the latest 2.3.4 version of Gingerbread.

  • The battery life has been substantially increased and also additionally, the wait for the Google Maps 5.1 3D is over as with an all new update of 2.3.4, you will now be able to access the Google Maps of 5.1 version in 3D and also not only this you will now be able to enjoy their improved version of Google Books as well as Voice search 2.1.1 version which has the capability to detect the voice actions more accurately.

  • Many users also reported an issue of frequent force closes in their gallery application which is now been fixed with this update of 2.3.4. By the way if you want to have an all new Gallery for Android then too you can enjoy it as it provides the iPhone like view of all the photos which are there in the Gallery with host of other added benefits and features.

  • Wi Fi and the 3G icons both of them indicate that they are active and also the strange behavior of the phone’s status bar has now been fixed.  Battery life has been substantially optimized for providing longer battery life but it doesn’t seem to be longer enough to match the expectations of most of the users.GPS Location as well as the navigation has now been improved with which location problems will be solved leading to the showcase of accurate location.

  • Some of the users reported that the Android Market Place encounters some of the stability issues and doesn’t respond when many applications are used simultaneously or when the Internet speed is less, this issue now has been fixed successfully with the help of this update of 2.3.4.

PLEASE BACKUP AL DATA BEFORE UPDATE !


  • Download the Gingerbread 2.3.4 update package for Samsung GALAXY FIT in your computer from here and as soon as you download it you will have to unzip to folder to get the files like Boot, CODE, Modem, CSC along with the Odin Multi uploader v 4.38. Please note that even if a single file is missing then it means that the files have not been downloaded properly and again you need to download them.


  • So, after downloading and in the extraction process if it prompts you to enter the password at any point of time then you will have to enter the password as “androidadvices.com” .


  • After this, just open the “Odin Multi uploader” file from the extracted folder and then you will have to now turn the phone Off as you will have to turn your phone ON in the download mode.



  • Please note that the download mode can be entered by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Now, if you have successfully entered into the download mode then you will see a green screen which is shown below. Please note that if the device boots in the normal mode with the home screen then retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone.



  • Now, as soon as you get into the download mode, you will have to connect the Galaxy FIT S 5670 to the computer with the help of USB cable while Odin opened in the desktop. As soon as you connect the phone, you will see that first ID:COM box as shown below will turn yellow and in the message box you will see that it will show ADDED as shown in the below snapshot and after that you will have to add the files respectively as shown below,



OPS – BENI_v1.0.ops,
BOOT – APBOOT_S5670XXKPG_CL233102_REV01_user_low_true.tar.md5,
Phone – MODEM_S5670XXKPG_CL233102_REV01.tar.md5,
PDA – CODE_S5670XXKPG_CL233102_REV01_user_low_true.tar.md5,
CSC – CSC_S5670SERKPG_CL233102_REV01_user_low_true.tar.md5,

  • As soon as you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes.


  • After the Galaxy FIT reboots, you will have see the home screen and then choose the options accordingly and then after you see the home screen and after the completion of Media scanning, you will have to go in the recovery mode wherein you will have to delete the cache memory so that all unwanted files are removed if there are any left in the phone. That’s it you have now successfully flashed your phone with the latest Android 2.3.4 update.

For checking on which firmware you are currently on, you will have to go to the Settings > About PhoneFirmware Version where you will find the version of Android OS where it will show 2.3.4. As you can see above that we have shown some of the images of latest Gingerbread update of 2.3.4. So, let us know if you face any sorts of issues as we will see to it that all issues are resolved.

15 comments:

yoo works fine for me
Thanks

can we root after updating to android 2.3.4

Worked fine for me...but wat abt tether fix..in samsung galaxy fit? Plz help

@Varun --------> ya we can root it after updating to android 2.3.4

hello how can i unroot it? cause ive already rooted it before updating..tnx

can you tell me the method how you rooted it ?? You rooted it with superuser ????????

@tanveer yaaa u must try it again !

@ tanveer this is caused due to the low battery ....
battery is not charged and ur phone got switched iff in between the process !
Please try to start the process again !

@ tanveer we needed a chat contact me @ aashishkohli12@gmail.com

same here taking more then 10 mins now wat to do ?
and in the white box it says
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5

i got a problem after upgrading my phone to gingerbread i cant type on my screen, i cant even select power off to reboot it..what should i do? HELP PLEASE!!!!!!!

gr8, working for me.... but too many force close wht to do?

@aadi please check the update !
and this update is for everyone !

he iz dis is d english language bcoz i downloaded directly frm samfirware and it gave me russian version

Post a Comment

Related Posts Plugin for WordPress, Blogger...